YD30 Series –A Revolutionary door lock for 180º swing and  90º swing doors.

The YD30 series electronic side load locks are motor driven electronic locks that use a collapsing mechanism that is deadbolted when locked. It is designed to secure commercial single or double acting doors.
The locks solve two significant challenges found with door locking:
1) align a misaligned door
2) release when requested, even with excessive load on the door
The YD30 series gives the user the ability to control access in and around a facility and provide traffic reports when desired.
Additionally, the YD30 series can be used in a more straightforward system where controlling access to a single door can be implemented with a stand-alone RTE access system.

YD30 Series is available in two models:

YD30D Double
A high traffic, low voltage, motor-driven door lock for 180° swing doors. It is typically activated by access control systems and used in commercial double entrance doors in either mortise or surface installation as well as swing-through glass doors where security is paramount, convenience required, and appearances important.
The pivot action of the YD30D bolt pins will `grab’ the strike plate and pull the door into position for a misalignment up to 16mm (+ -8mm, + -5/16”)
Found in most market sectors but primarily in commercial, healthcare, airports and government.

YD30S Single
A high traffic, low voltage, motor-driven door lock for 90° doors. It is typically activated by access control systems and used in single acting pedestrian doors where door alignment or releasing when requested under sideload is required.
The pivot action of the YD30S bolt pins will ‘grab’ the strike plate and pull the door into position for a misalignment up to 8mm (5/16”).
It is commonly seen in mortise installations on office doors but also used on single acting glass doors where security is paramount, convenience required, and appearances important.

YD30 Series benefits

Door alignment • Door misalignment of up to 16mm (+/-8mm) is corrected
Side load release • The door can have in excess of 1322 lbs (600Kg) being applied and it will still release instantly when requested
High security • Automatic deadbolting • 2204 lbs (1,000 Kg) holding force • Two, 10mm thick stainless steel bolt pins
Electronic convenience • Input voltage from 12VDC – 24VDC • Less than 50mA standby current • Reverse polarity and transient protection •
Multiple attempts to lock

Simple configuration • Convert from Fail Safe to Fail Secure by repositioning a single DIP Switch
Dual monitoring • Door and bolt positions
Versatile installation • Mortise mount horizontally or vertically, on double acting doors • Installation to metal doors and frames with the addition of the SLA208 installation tabs (sold separately) • Surface mount with the aid of the accessories, including mounting onto glass • User selectable fail-safe and fail-secure modes

Download the full datasheet here.